D-Link xStack DES-6500 Cli Manual page 46

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create snmp community
Restrictions
Example usage:
To create the SNMP community string "dlink:"
D E S - 6 5 0 0 : 4 # c r e a t e s n m p c o m m u n i t y d l i n k v i e w R e a d V i e w
r e a d _ w r i t e
C o m m a n d : c r e a t e s n m p c o m m u n i t y d l i n k v i e w R e a d V i e w
r e a d _ w r i t e
S u c c e s s .
D E S - 6 5 0 0 : 4 #
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
D E S - 6 5 0 0 : 4 # d e l e t e s n m p c o m m u n i t y d l i n k
C o m m a n d : d e l e t e s n m p c o m m u n i t y d l i n k
S u c c e s s .
D E S - 6 5 0 0 : 4 #
allowed to access on the Switch.
read_only  Specifies that SNMP community members using the community
string created with this command can only read the contents of the MIBs on
the Switch.
read_write  Specifies that SNMP community members using the
community string created with this command can read from and write to the
contents of the MIBs on the Switch.
Only Administrator-level users can issue this command.
Used to remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a previously
defined SNMP community string from the Switch.
<community_string 32>  An alphanumeric string of up to 32 characters
that is used to identify members of an SNMP community. This string is
used like a password to give remote SNMP managers access to MIB
objects in the Switch's SNMP agent.
Only Administrator-level users can issue this command.
42