D-Link xStack DES-6500 Cli Manual page 25

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
D E S - 6 5 0 0 : 4 # s a v e
C o m m a n d : s a v e
S a v i n g a l l c o n f i g u r a t i o n s t o N V - R A M ...
D E S - 6 5 0 0 : 4 #
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
Used to save changes in the Switch's configuration to non-volatile
RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
Entering just the save command will save only the Switch configuration
to NV-Ram.
Only Administrator-level users can issue this command.
NOTE: The DES-6500 does not support a change in box mode from Auto to Static.
Used to restart the Switch.
reboot
This command is used to restart the Switch.
None.
None.
D E S - 6 5 0 0 : 4 # r e b o o t
C o m m a n d : r e b o o t
A r e y o u s u r e w a n t t o p r o c e e d w i t h t h e s y s t e m
r e b o o t ? ( y / n )
P l e a s e w a i t , t h e S w i t c h i s r e b o o t i n g . . .
D o n e .
21