D-Link xStack DES-6500 Cli Manual page 278

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the ARP table:
DES-6500:4#show arpentry
Command: show arpentry
ARP Aging Time : 30
Interface
-------------
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
System
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show arpentry ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
Used to display the ARP table.
show arpentry {ipif <ipif_name 12> | static}
This command is used to display the current contents of the Switch's
ARP table.
ipif <ipif_name 12>  Enter the IP interface name for which to display
ARP settings.
static  Displays the static entries to the ARP table.
None.
IP Address
---------------
10.0.0.0
10.1.1.1
10.1.1.151
10.1.1.154
10.1.1.156
10.1.1.161
10.1.1.164
10.1.1.172
10.1.1.180
10.1.1.191
10.1.1.254
10.1.104.222
10.2.87.6
10.5.2.5
10.9.18.2
10.9.68.1
10.9.68.3
Used to display a specific IP address located in the ARP table.
show arpentry ipaddress <ipaddr>
This command is used to display the current settings of a specific IP
address located in the ARP table.
<ipif_name 12>  The name of the IP interface the end node or station
for which the ARP table entry was made, resides on.
None.
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
08-00-28-32-00-AC
00-50-BA-70-D6-D0
00-50-BA-97-D9-56
00-50-BA-F5-F4-74
00-50-BA-70-E4-89
00-50-BA-70-E4-65
00-50-BA-70-E4-49
00-2A-3C-20-4E-A0
00-50-BA-F5-F4-87
00-03-09-18-10-01
00-04-00-00-00-00
00-0E-A6-01-D6-D1
00-E0-18-D4-63-1C
00-A0-D1-A8-9A-F0
00-A0-C9-A4-22-5B
00-A0-C9-A4-22-B9
274
Type
---------------
Local/Broadcast
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic