D-Link xStack DES-6500 Cli Manual page 294

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create route redistribute dst rip src
Restrictions
Routing information source  OSPF and the Static Route table. Routing information will be redistributed to RIP. The following
table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.
Entering the Type combination  internal type_1 type_2 is functionally equivalent to all. Entering the combination type_1
type_2 is functionally equivalent to external. Entering the combination internal external is functionally equivalent to all.
Entering the metric 0 specifies transparency.
Example usage:
To add route redistribution settings:
DES-6500:4#create route redistribute dst rip src ospf
all metric 2
Command: create route redistribute dst rip src ospf
all metric 2
Success.
DES-6500:4#
config route redistribute dst ospf src
Purpose
Syntax
Description
This is analogous to a HOP Count in the RIP routing protocol.
Only Administrator-level users can issue this command.
Route Source Metric
OSPF 0 to 16
Static 0 to 16
Used configure route redistribution settings for the exchange of RIP
routes to OSPF routes on the Switch.
config route redistribute dst ospf src [static | rip | local] {mettype
[1 | 2] | metric <value 0-16777214>}
Route redistribution allows routers on the network  that are running
different routing protocols to exchange routing information. This is
accomplished by comparing the routes stored in the various router's
routing tables and assigning appropriate metrics. This information is
then exchanged among the various routers according to the individual
routers current routing protocol. The switch can redistribute routing
information between the OSPF and RIP routing protocols to all routers
on the network that are running OSPF or RIP. Routing information
entered into the Static Routing Table on the local switch is also
redistributed.
Type
all
type_1
type_2
inter+e1
inter+e2
external
internal
not applicable
290