D-Link xStack DES-6500 Cli Manual page 59

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location for "H Q 5 F ":
D E S - 6 5 0 0 : 4 # c o n f i g s n m p s y s t e m _ l o c a t i o n H Q 5 F
C o m m a n d : c o n f i g s n m p s y s t e m _ l o c a t i o n H Q 5 F
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "
D E S - 6 5 0 0 : 4 # c o n f i g s n m p s y s t e m _ c o n t a c t M I S
D e p a r t m e n t I I
C o m m a n d : c o n f i g s n m p s y s t e m _ c o n t a c t M I S
D e p a r t m e n t I I
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to enter a description of the location of the Switch.
config snmp system_location <sw_location>
The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255 characters
can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL string
is accepted if there is no location desired.
Only Administrator-level users can issue this command.
Used to configure the name for the Switch.
config snmp system_name <sw_name>
The config snmp system_name command configures the name of the
Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL string is
accepted if no name is desired.
Only Administrator-level users can issue this command.
DES-6500 Chassis Switch
":
55