D-Link xStack DES-6500 Cli Manual page 272

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNTP support:
DES-6500:4#disable sntp
Command: disable sntp
Success.
DES-6500:4#
config time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To manually set system time and date settings:
DES-6500:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DES-6500:4#
Disables SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
None.
Only Administrator-level users can issue this command.
Used to manually configure system time and date settings.
config time date <date ddmthyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the day of
the month, three alphabetical characters for the name of the month,
and four numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock, the
minute and second. For example: 19:42:30.
Only Administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
268