D-Link xStack DES-6500 Cli Manual page 162

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports.
D E S - 6 5 0 0 : 4 # s h o w r o u t e r _ p o r t s
C o m m a n d : s h o w r o u t e r _ p o r t s
V L A N N a m e
S t a t i c r o u t e r p o r t
D y n a m i c r o u t e r p o r t :
F o r b i d d e n R o u t e r P o r t :
V L A N N a m e
S t a t i c r o u t e r p o r t
D y n a m i c r o u t e r p o r t :
F o r b i d d e n R o u t e r P o r t :
T o t a l E n t r i e s : 2
D E S - 6 5 0 0 : 4 #
show igmp_snooping
Purpose
Syntax
Description
Parameters
Used to display the currently configured router ports on the Switch.
show router_ports {vlan <vlan_name 32>} {static | dynamic |
forbidden}
This command will display the router ports currently configured on the
Switch.
vlan <vlan_name 32>  The name of the VLAN on which the router
port resides.
static  Displays router ports that have been statically configured.
dynamic  Displays router ports that have been dynamically
configured.
forbidden – Displays router ports that have been labeled as forbidden.
None.
: d e f a u l t
: 2 : 1 - 2 : 1 0
: v l a n 2
:
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration
on the Switch.
<vlan_name 32>  The name of the VLAN for which to view the IGMP
158