D-Link xStack DES-6500 Cli Manual page 169

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
D E S - 6 5 0 0 : 4 # d i s a b l e a u t h e n _ p o l i c y
C o m m a n d : d i s a b l e a u t h e n _ p o l i c y
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the system access authentication policy:
D E S - 6 5 0 0 : 4 # s h o w a u t h e n _ p o l i c y
C o m m a n d : s h o w a u t h e n _ p o l i c y
A u t h e n t i c a t i o n P o l i c y : E n a b l e d
D E S - 6 5 0 0 : 4 #
create authen_login method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the method list "Trinity":
Used to display the system access authentication policy status on
the Switch.
show authen_policy
This command will show the current status of the access
authentication policy on the Switch.
None.
None.
Used to create a user defined method list of authentication methods
for users logging on to the Switch.
create authen_login method_list_name <string 15>
This command is used to create a list for authentication techniques
for user login. The Switch can support up to eight method lists, but
one is reserved as a default and cannot be deleted. Multiple method
lists must be created and configured separately.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list.
Only Administrator-level users can issue this command.
165