D-Link xStack DES-6500 Cli Manual page 340

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#
disable ospf
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To disable OSPF on the Switch:
DES-6500:4#disable ospf
Command: disable ospf
Success.
DES-6500:4#
show ospf
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To show OSPF state:
Used to disable OSPF on the Switch.
disable ospf
This command, in combination with the enable ospf command above,
is used to enable and disable OSPF on the Switch.
None.
Only Administrator-level users can issue this command.
Used to display the current OSPF state on the Switch.
show ospf
This command will display the current state of OSPF on the Switch,
divided into the following categories:
General OSPF settings
OSPF Interface settings
OSPF Area settings
OSPF Virtual Interface settings
OSPF Area Aggregation settings
OSPF Host Route settings
None.
None.
336