D-Link xStack DES-6500 Cli Manual page 297

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
delete route redistribute
Restrictions
Example usage:
To delete route redistribution settings:
show route redistribute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display route redistributions:
DES-6500:4#show route redistribute
Command: show route redistribute
Source
Protocol
--------
STATIC
LOCAL
Total Entries : 2
DES-6500:4#
OSPF.
Only Administrator-level users can issue this command.
DES-6500:4#delete route redistribute dst rip src
ospf
Command: delete route redistribute dst rip src
ospf
Success.
DES-6500:4#
Used to display the route redistribution on the Switch.
show route redistribute {dst [rip|ospf] | src [rip|static|local|ospf]}
Displays the current route redistribution settings on the Switch.
src [rip | static | local | ospf]  Allows the selection of the routing
protocol on the source device. The user may choose between RIP,
static, local or OSPF.
dst [rip | ospf]  Allows the selection of the routing protocol on the
destination device. The user may choose between RIP and OSPF.
None.
Destination Type
Protocol
----------- --------
RIP All
OSPF Type-2
Metric
-------
1
20
293