D-Link xStack DES-6500 Cli Manual page 360

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
delete ipmroute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To delete an IP multicast static route entry:
DES-6500:4# delete ipmroute 11.0.0.0/8
Command: delete ipmroute 11.0.0.0/8
Success.
DES-6500:4#
show ipmroute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display an IP multicast static route entry:
DES-6500:4# show ip mroute 11.0.0.0/8
Command: show ip mroute 11.0.0.0/8
Index
-----
1
DES-6500:4#
Used to delete an ip multicast static route configuration entry.
delete ipmroute [<network_address>|all]
Deletes an ip multicast static route configuration entry.
network_address - The entry corresponds to the specified network to
be deleted.
all - All configured entries will be removed.
Only Administrator-level users can issue this command.
Used to display the ip multicast static route configuration entry.
show ipmroute { <network_address>}
The show ipmroute command display RPF check entry to a source IP
address range.
network_address - Network address, if IP multicast packet received
match it, we will use RPF address configured to do RPF check.
None.
Source IP Address
--------------------
11.0.0.0/8
Total Entries : 1
RPF IP Address
---------------------
20.1.1.1
356