D-Link xStack DES-6500 Cli Manual page 42

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create snmp user
Restrictions
Example usage:
To create an SNMP user on the Switch:
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
D E S - 6 5 0 0 : 4 # d e l e t e s n m p u s e r d l i n k
C o m m a n d : d e l e t e s n m p u s e r d l i n k
S u c c e s s .
D E S - 6 5 0 0 : 4 #

<priv_key 32-32> - Enter an alphanumeric key string of
exactly 32 characters, in hex form, that will be used to
encrypt the contents of messages the host sends to
the agent.

none – Adding this parameter will add no encryption.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # c r e a t e s n m p u s e r d l i n k d e f a u l t
e n c r y p t e d b y _ p a s s w o r d a u t h m d 5 a u t h _ p a s s w o r d
p r i v n o n e
C o m m a n d : c r e a t e s n m p u s e r d l i n k d e f a u l t
e n c r y p t e d b y _ p a s s w o r d a u t h m d 5 a u t h _ p a s s w o r d
p r i v n o n e
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMP_name 32>
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<SNMP_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only Administrator-level users can issue this command.
38