D-Link xStack DES-6500 Cli Manual page 352

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#
show ospf ipif
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the current OSPF interface settings, for a specific OSPF interface:
DES-6500:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name:
Network Medium Type: BROADCAST
Area ID:
Administrative State:
Priority:
DR Address:
Hello Interval:
Transmit Delay:
Authentication:
Total Entries: 1
DES-6500:4#
show ospf all
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch:
DES-6500:4#show ospf all
Command: show ospf all
Interface Name: System IP Address:
Network Medium Type: BROADCAST
Area ID: 0.0.0.0
Used to display the current OSPF interface settings for the specified
interface name.
show ospf ipif <ipif_name 12>
This command will display the current OSPF interface settings for the
specified interface name.
<ipif_name 12>  The IP interface name for which to display the
current OSPF interface settings.
None.
ipif2
1.0.0.0
Enabled
1
123.234.12.34
10
1
None
Used to display the current OSPF settings of all the OSPF interfaces
on the Switch.
show ospf all
This command will display the current OSPF settings for all OSPF
interfaces on the Switch.
None.
None.
IP Address: 123.234.12.34/24 ((Link Up)
Metric:
DR State:
Backup DR Address:
Dead Interval:
Retransmit Time:
10.42.73.10/8 (Link Up)
Metric:
Administrative State:
348
1
DR
None
40
5
1
Enabled