D-Link xStack DES-6500 Cli Manual page 208

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
T o t a l e n t r i e s : 1
D E S - 6 5 0 0 : 4 #
delete 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete 802.1x users:
D E S - 6 5 0 0 : 4 # d e l e t e 8 0 2 . 1 x u s e r d t r e m b l e t t
C o m m a n d : d e l e t e 8 0 2 . 1 x u s e r d t r e m b l e t t
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show 802.1x auth_configuration
Purpose
Syntax
Description
Used to delete an 802.1x user account on the Switch.
delete 802.1x user <username 15>
The delete 802.1x user command is used to delete the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
<username 15>  A username can be as many as 15 alphanumeric
characters.
Only Administrator-level users can issue this command.
Used to display the current configuration of the 802.1x server on the
Switch.
show 802.1x auth_configuration {ports [<portlist> | all]}
The show 802.1x command is used to display the current
configuration of the 802.1x Port-based or MAC-based Network Access
Control server application on the Switch.
The following details what is displayed:
802.1x Enabled/Disabled  Shows the current status of 802.1x
functions on the Switch.
Authentication Mode: Displays the type of authentication mode of the
802.1x function on the Switch. This field may read Port_based or
MAC-based.
Authentication Protocol: Radius_Eap  Shows the authentication
protocol suite in use between the Switch and a RADIUS server.
Port number  Shows the physical port number on the Switch.
Capability: Authenticator/None  Shows the capability of 802.1x
functions on the port number displayed above. There are two 802.1x
capabilities that can be set on the Switch: Authenticator and None.
AdminCtlDir: Both/In  Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
204