D-Link xStack DES-6500 Cli Manual page 56

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
delete trusted_host
Description
Parameters
Restrictions
Example usage:
To delete a trusted host with an IP address 10.48.74.121:
enable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
enable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
This command is used to delete a trusted host entry made using the
create trusted_host command above.
<ipaddr>  The IP address of the trusted host.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # d e l e t e t r u s t e d _ h o s t 1 0 . 4 8 . 7 4 . 1 2 1
C o m m a n d : d e l e t e t r u s t e d _ h o s t 1 0 . 4 8 . 7 4 . 1 2 1
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap
support on the Switch.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # e n a b l e s n m p t r a p s
C o m m a n d : e n a b l e s n m p t r a p s
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to enable SNMP authentication trap support.
enable snmp authenticate_traps
This command is used to enable SNMP authentication trap support on
the Switch.
None.
Only Administrator-level users can issue this command.
52