D-Link xStack DES-6500 Cli Manual page 310

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To disable RIP:
DES-6500:4#disable rip
Command: disable rip
Success.
DES-6500:4#
show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RIP configuration:
DES-6500:4#show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
Interface
------------- ------------------ ---------- ------------- ---------- -----
System
Total Entries : 1
DES-6500:4#
Used to display the RIP configuration and statistics for the Switch.
show rip {ipif <ipif_name 12>}
This command will display the RIP configuration and statistics for a
given IP interface or for all IP interfaces.
ipif <ipif_name 12>  The name of the IP interface for which to
display the RIP configuration and settings. If this parameter is not
specified, the show rip command will display the global RIP
configuration for the Switch.
None.
IP Address
10.90.90.90/8
TX Mode RX Mode
Disabled Disabled
306
Authen- State
tication
Disabled Disabled