D-Link xStack DES-6500 Cli Manual page 77

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
D E S - 6 5 0 0 : 4 # d i s a b l e s y s l o g
C o m m a n d : d i s a b l e s y s l o g
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current status of the syslog function:
D E S - 6 5 0 0 : 4 # s h o w s y s l o g
C o m m a n d : s h o w s y s l o g
S y s l o g G l o b a l S t a t e : E n a b l e d
D E S - 6 5 0 0 : 4 #
create syslog host
Purpose
Syntax
Used to disable the system log function on the Switch.
disable syslog
The disable syslog command disables the system log function on
the Switch. After disabling, Syslog entries will no longer be sent to
a remote host.
None.
Only Administrator-level users can issue this command.
Used to display the syslog protocol status as enabled or disabled.
show syslog
The show syslog command displays the syslog status as
enabled or disabled.
None.
None.
Used to create a new syslog host.
<index 1-4> {severity [informational | warning | all] | facility [local0
73