Injection Pump Reassembly - Toyota 1KZ-TE Repair Manual

CLICK HERE TO VIEW CHAPTER INDEX
Hold
Fuel Temp. Sensor
19 mm Deep Socket Wrench
ENGINE FUEL
SST
S04827
SST
S04413
SST
S04830
S04825
S04410
- - INJECTION PUMP
RE AS S E M BLY
1 . MO UNT P UMP BO DY TO S S T (S TAND)
SST 09241 -- 76022, 09245 -- 54010
2. INSTALL DELIVERY VALVE HOLDERS
(a) Install new gaskets and the valves into the distributive
head.
(b) Install the springs into the delivery valve holders.
(c) Using SST, install the delivery valve holders.
SST 09260 -- 54012 (09269 -- 54020)
Torque: 58.85 N∙m (600 kgf∙cm, 43 ft∙lbf)
3. INSTALL DISTRIBUTIVE HEAD PLUG
(a) Install a new O--ring to the distributive head plug.
(b) Using SST, install the head plug.
SST 09260 -- 54012 (09262 -- 54010)
Torque: 88 N∙m (900 kgf∙cm, 65 ft∙lbf)
4. INSTALL DISTRIBUTIVE HEAD PLUG (NO.2) AND
FUEL TEMPERATURE SENSOR
(a) Install a new O--ring to the distributive head plug.
(b) Install the wave washer, strainer and head plug.
(c) Install a new O--ring to the fuel temperature sensor.
(d) Hold the distributive head plug, and using a 19 mm deep
socket wrench, install the fuel temperature sensor.
Torque: 21.6 N∙m (220 kgf∙cm, 16 ft∙lbf)
1KZ-TE Pages From Manual
TO MODEL INDEX
FU- -23
FU03T- -02
CONTINUED