Toyota 1KZ-TE Repair Manual page 156

CLICK HERE TO VIEW CHAPTER INDEX
Seal Paking
ENGINE MECHANICAL - - CYLINDER HEAD
(g) Using a plastic--faced hammer, lightly tap the valve stem
tip to assure a proper fit.
A11106
4 . I NS TALL VALV E LI FTE RS AND S HI MS
(a) Install the valve lifter and shim.
(b) Check that the valve lifter rotates smoothly by hand.
5 . I NS TALL WAT E R TE MP E RAT URE S E NDE R G AUG E
6 . I NS TALL WI RE CLAMP BRACKE T
A11094
7 . I NS TALL S E MI CI RCULAR P L UG
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the semi circular plug as shown.
Seal packing: Part No. 08826- -00080 or equivalent
(c) Install the half circular plug to the cylinder head.
A11107
8. INSTALL HEATER WATER INLET PIPE
Install a new gasket, the heater water inlet pipe with the 2 nuts
and bolt.
A11092
9 . I NS TALL F RO NT E NG I NE HANG E R
Install the front engine hanger to the cylinder head.
Torque: 41 N∙m (420 kgf∙cm, 30 ft∙lbf)
A11065
1KZ-TE Pages From Manual
TO MODEL INDEX
EM- -63