CLICK HERE TO VIEW CHAPTER INDEX
New Gasket
30˚
Jiggle
Valve
COOLING
INSTALLATION
1.
(a)
B09318
(b)
30˚
HINT:
The jiggle valve may be set within 30˚ of either side of the pre-
scribed position.
S04821
2.
Install the water inlet with the 3 bolts.
NOTICE:
Torque the 2 upper bolts first.
3.
4.
S04555
- -
THERMOSTAT
PLACE THERMOSTAT IN CYLINDER BLOCK
Install a new gasket to the thermostat.
Install the thermostat with the jiggle valve upward.
INSTALL WATER INLET TO CYLINDER BLOCK
Torque: 13 N∙m (130 kgf∙cm, 9 ft∙lbf)
FILL WITH ENGINE COOLANT
START ENGINE AND CHECK FOR COOLANT LEAKS
1KZ-TE
Pages From Manual
TO MODEL INDEX
CO- -13
CO0NL- -02