Toyota 1KZ-TE Repair Manual page 232

CLICK HERE TO VIEW CHAPTER INDEX
FU- -10
ENGINE FUEL
SST
FU2910
- - INJECTION NOZZLE
RE AS S E M BLY
1 . ASSEMBLE I NJ ECTION NO ZZLE HO LDERS
(a) Assemble the nozzle holder retaining nut, the nozzle as-
sembly, distance piece, pressure pin, pressure spring,
adjusting shim and nozzle holder body, and finger tighten
the retaining nut.
(b) Using SST, tighten the retaining nut.
SST 09268 -- 64010 (09268 -- 64020)
Torque: 37 N∙m (375 kgf∙cm, 27 ft∙lbf)
NOTICE:
Over torquing could cause nozzle deformation and needle
adhesion or other defects.
2. PERFORM PRESSURE AND SPRAY PATTERN TEST
(S e e pa ge FU - - 11 )
1KZ-TE Pages From Manual
TO MODEL INDEX
FU06V- -01