Toyota 1KZ-TE Repair Manual page 155

CLICK HERE TO VIEW CHAPTER INDEX
EM- -62
Knock
Pin
Notch
(b)
ENGINE MECHANICAL
2 .
(a)
(b)
P11868
(c)
If the protrusion is less than specified, adjust with shims.
P11867
If the protrusion is greater than specification, replace the cham-
ber and recheck the protrusion.
3.
(a)
(b)
(d) (e)
(c)
(d)
(e)
(c)
(a)
A11105
(f)
SST
P12197
- - CYLINDER HEAD
I NS TALL CO MBUS TI O N CHAMBE RS
Align the knock pin of the combustion chamber with the
notch of the cylinder head.
Using a plastic--faced hammer, tap in the combustion
chamber.
Using a dial indicator, measure the protrusion of the com-
bustion chamber from the cylinder head.
Protrusion:
Minus 0.03 - - Plus 0.02 mm
(Minus 0.0012 - - Plus 0.0008 in.)
Shim thickness:
0.05 mm (0.0020 in.)
0.10 mm (0.0039 in.)
INSTALL VALVES
Install the oil seal.
Install the valve.
Install the spring seat.
Install the valve spring.
Install the spring retainer.
Using SST, compress the valve spring and place the 2
keepers around the valve stem.
SST 09202 -- 70020 (09202 -- 00010)
1KZ-TE Pages From Manual
TO MODEL INDEX
CONTINUED