CLICK HERE TO VIEW CHAPTER INDEX
Example
INTRODUCTION
- -
REPAIR INSTRUCTIONS
(m)
Tag hoses before disconnecting them:
(1)
When disconnecting vacuum hoses, use tags to
identify how they should be reconnected.
(2)
After completing a job, double check that the vacu-
um hoses are properly connected. A label under the
hood shows the proper layout.
(n)
Unless otherwise stated, all resistance is measured at an
ambient temperature of 20˚C (68˚F). Because the resis-
tance may be outside specifications if measured at high
IN0002
temperatures immediately after the vehicle has been run-
ning, measurement should be made when the engine has
cooled down.
1KZ-TE
Pages From Manual
TO MODEL INDEX
IN- -7