Alternator Disassembly; Remove Rear End Cover; Remove Brush Holder And Ic Regulator; Remove Rectifier Holder - Toyota 1KZ-TE Repair Manual

CLICK HERE TO VIEW CHAPTER INDEX
CH- -6
CHARGING
B00762
B00763
B00764
SST (A)
SST (B)
B00765
- - ALTERNATOR
DISASSEMBLY
1.

REMOVE REAR END COVER

(a) Remove the nut and terminal insulator.
(b) Remove the 3 nuts and end cover.
2.

REMOVE BRUSH HOLDER AND IC REGULATOR

(a) Remove the 5 screws, bush holder and IC regulator.
(b) Remove the brush holder cover from the brush holder.
3.

REMOVE RECTIFIER HOLDER

Remove the bolt, 4 screws and rectifier holder.
4. REMOVE PULLEY
(a) Hold SST (A) with a torque wrench, and tighten SST (B)
clockwise to the specified torque.
SST 09820--63010
Torque: 39 N∙m (400 kgf∙cm, 29 ft∙lbf)
(b) Check that SST (A) is secured to the rotor shaft.
1KZ-TE Pages From Manual
TO MODEL INDEX
CH08S- -02
CONTINUED