Starter Reassembly - Toyota 1KZ-TE Repair Manual

CLICK HERE TO VIEW CHAPTER INDEX
ST- -16
STARTING - - STARTER
RE AS S E M BLY
HINT:
Use high--temperature grease to lubricate the bearings and
gears when assembling the starter.
1 . P L ACE ARMAT URE I NTO FI E L D F RAME
(a) Apply a grease to the armature bearings.
(b) Using a press, press the armature into the field frame.
P04699
2 . I NS TALL BRUS H HO L DE R
(a) Align the claw of the brush holder with the claw groove of
the field frame.
(b) Place the brush holder on the field frame.
ST0096
(c) Using a screwdriver, hold the brush spring back, and con-
nect the brush into the brush holder. Contact the 4
brushes.
NOTICE:
Check that the positive (+) lead wires are not grounded.
N00562
3 . I NS E RT S TE E L BALL I NTO CLUTCH S HAFT HO L E
(a) Apply grease to the steel ball.
(b) Insert the steel ball into the clutch shaft hole.
4. INSTALL STARTER HOUSING, CLUTCH ASSEMBLY
AND G E ARS
(a) Apply grease to the return spring.
(b) Insert the return spring into the magnetic switch hole.
P05018
1KZ-TE Pages From Manual
TO MODEL INDEX
ST0BO- -02
CONTINUED