Toyota 1KZ-TE Repair Manual page 227

CLICK HERE TO VIEW CHAPTER INDEX
(A)
ENGINE FUEL
S04839
P11700
(A)
(B)
P12512
(A)
P12510
P12857
- - INJECTION NOZZLE
RE M O VAL
1. REMOVE INTAKE PIPE
(a) Disconnect the 2 VSV connectors.
(b) Disconnect the 2 vacuum hoses from the actuator.
(c) Disconnect the vacuum hose from the 3--way (from vacu-
um pump).
(d) Remove the 4 nuts and seal washers.
(e) Disconnect the 2 PCV hoses.
(f) Use pliers to pinch the ends of the clamp together until the
lock plate engages the catch.
Make sure the lock plate and catch are engaged securely.
(g) Remove the intake pipe and gasket.
(h) Remove the 2 nuts and accelerator cable bracket from
the intake pipe.
(i) Remove the 2 nuts and PCV pipe from the intake pipe.
2. REMOVE INJECTION PIPES
(a) Remove the 2 nuts holding the clamps (A) to the intake
manifold.
(b) Using a screwdriver, pry out the clamp (B).
(c) Loosen the 8 union nuts of the injection pipes.
(d) Remove the 4 injection pipes and 2 clamps (A).
3 . RE MO V E NO ZZLE LE AKAG E P I P E
(a) Disconnect the fuel hose from the return pipe.
(b) Remove the 4 nuts, leakage pipe and 4 gaskets.
1KZ-TE Pages From Manual
TO MODEL INDEX
FU- -5
FU06S- -01
CONTINUED