Injection Pump Disassembly - Toyota 1KZ-TE Repair Manual

CLICK HERE TO VIEW CHAPTER INDEX
FU- -20
Fuel Outlet
Hollow Screw
Hold
Fuel Temp. Sensor
19 mm Deep Socket Wrench
ENGINE FUEL - -
DI SASSEMBLY
1. MOUNT PUMP ASSEMBLY TO SST (STAND)
SST
2 . RE MO V E S E T KE Y O F DRI V E P ULLE Y F RO M DRI V E
SST
S HAFT
S04407
3. REMOVE FUEL PIPES AND INLET HOLLOW SCREW
(a) Remove the overflow screw, fuel outlet pipe and 2 gas-
kets.
(b) Remove the cap nut, bolt, fuel inlet pipe and 2 gaskets.
(c) Remove the fuel outlet hollow screw and gasket.
S04319
4 . RE MO V E S O LE NO I D CO NNE CTO R S UP P O RT CLI P
5 mm
Hexagon
(a) Using a 5 mm hexagon wrench, remove the 3 bolts and
Wrench
solenoid connector support clip.
(b) Disconnect the 2 lead wires and 2 connectors from the
clamps.
S04408
5 . RE MO V E TI MI NG CO NTRO L VALV E
Using a 5 mm hexagon wrench, remove the 2 bolts and timing
control valve.
5 mm
Hexagon
Wrench
S04409
6. REMOVE FUEL TEMPERATURE SENSOR AND DIS -
TRIBUTIVE HEAD PLUG (NO.2)
(a) Hold the distributive head plug, and using a 19 mm deep
socket wrench, remove the fuel temperature sensor and
O--ring.
S04410
INJECTION PUMP
09241 -- 76022, 09245 -- 54010
1KZ-TE Pages From Manual
TO MODEL INDEX
FU03R- -02
CONTINUED