Install Timing Belt Tensioner; Install Timing Belt Cover; Install Cylinder Head Cover - Toyota 1KZ-TE Repair Manual

CLICK HERE TO VIEW CHAPTER INDEX
ENGINE MECHANICAL - - CYLINDER HEAD
13.

INSTALL TIMING BELT TENSIONER

(a) Temporarily install the timing belt tensioner with the 2
bolts while pushing the idler pulley toward the timing belt.
(b) Tighten the 2 bolts.
Torque: 13 N∙m (130 kgf∙cm, 9 ft∙lbf)
(c) Remove the 1.5 mm hexagon wrench from the tensioner.
S04554
1 4 . CHE CK VALV E T I MI NG
Turn the crankshaft pulley clockwise and check that each pulley
aligns with the timing marks (TDC mark) as shown in the illustra-
tion.
If the marks do not align, remove the timing belt and reinstall it.
P12462
15.

INSTALL TIMING BELT COVER

(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the camshaft oil seal retainer and
timing gear cover a shown in the illustration.
Seal packing: Part No. 08826- -00080 or equivalent
(c) Install the gasket to the timing belt cover.
(d) Install the timing belt cover with the 4 seal washers, bolts
and 2 clips.
1 6 . CHE CK AND ADJ US T VALV E CLE ARANCE
P12639
(S e e pa ge E M - - 4 )
17.

INSTALL CYLINDER HEAD COVER

(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the cylinder head as shown in the
illustration.
Seal packing: Part No. 08826- -00080 or equivalent
(c) Install the gasket to the cylinder head cover.
(d) Install the cylinder head cover with the 10 bolts and 2
nuts. Uniformly tighten the bolts and nuts in several
passes.
S04550
Torque: 9 N∙m (90 kgf∙cm, 78 in.∙lbf)
1KZ-TE Pages From Manual
TO MODEL INDEX
EM- -69
CONTINUED