Wireless Setting Through Dell Printer Configuration Web Tool - Advanced Setup - Dell 2130cn - Color Laser Printer User Manual

NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless settings tool provided
by your wireless device manufacturer.
For Windows Vista:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the printer from the network items listed in Connect to a network.
f. Select Connect Anyway in the warning dialog box indication indicating you are entering an unsecured area.
g. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select the setting you send to the printer from the network items listed in Connect to a network.
e. Select Connect Anyway in the warning dialog box indication indicating you are entering an unsecured area.
f. Click Close in the dialog box after confirming the connection is a success.

Wireless Setting through Dell Printer Configuration Web Tool - Advanced setup

Access point (Infrastructure, DHCP network)
1. Create new wireless settings for your computer.
NOTE: If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings
using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control Panel.
b. Right-click Wireless Network Connection and select Properties.
c. Select the Wireless Networks tab.
d. Ensure the check box for Use Windows to configure my wireless network settings is checked.
NOTE: Be sure to write down the current wireless computer settings in steps d and g so that you can restore them later.