Toshiba e-STUDIO2330C Service Manual page 1211

[B] Adjustment
Simplex copying:
(1) Shift the aligning plate with the scale as the guide shown in the figure below to adjust the skew.
(2) If the image skew is "C" as shown in the figure below, shift the aligning plate in the direction of
"+", and if "D", shift it to "-".
Fig. 28-102
Shift the aligning plate in the direction of "+".
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 28-101
C
Shift the aligning plate in the direction of "-".
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
28 - 49
D
Fig. 28-103
SETTING / ADJUSTMENT OF OPTION
28