Fine Adjustment Of Binding/Folding Position (Saddle Stitcher Unit) - Toshiba e-STUDIO2330C Service Manual

28.3.4

Fine adjustment of binding/folding position (Saddle stitcher unit)

The binding position/folding position can be adjusted in the following (05) codes.
Code Paper size
468-0 A4-R / LT-R
468-1 B4
468-2 A3 / LD
Increase the adjustment value when the sheet of paper which has exited is "A".
Decrease the adjustment value when the sheet of paper which has exited is "B".
A: When the upper side of the folding
is longer than the lower side
Paper feeding direction
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SETTING / ADJUSTMENT OF OPTION
When the value increases, the binding/folding position shifts toward the right
page. (0.25mm/step)
Acceptable values: -14 to 14 (Default: 0)
B: When the upper side of the folding is
Fig. 28-79
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
28 - 36
Remarks
shorter than the lower side
Paper feeding direction