[B] Adjustment
(1)
Close the RADF.
(2)
Adjust it by turning the adjustment screws on the hinges.
•
Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
•
Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise .................. Lowered
Turn it counterclockwise ...... Heightened
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 28-98
Fig. 28-99
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
28 - 47
SETTING / ADJUSTMENT OF OPTION
28