Maintenance; Confirmation Procedure Of Local Terminal Operation Using Self-Loop; Lan Communication Test Using Ping - Sony PCS-G70 Integration Manual

2-1. Confirmation Procedure of Local
Terminal Operation Using Self-Loop
A self-loop is the loopback in the codec of the communica-
tion terminal.
Operation procedure
1. The launcher menu below is displayed when the power
switch on the communication terminal is turned on.
Tokyo
New York
IP:
ISDN:
Paris
AUTO
Enter the remote party number.
Line type Number text box
2. Select "Line I/F" using the , , ,
remote commander, and press the PUSH ENTER
button. Then, select "LAN" or "ISDN" using the
and buttons, and press the PUSH ENTER button.
3. Select the number entry field using the , , ,
buttons on the remote commander, and press the
PUSH ENTER button. Then, enter * (asterisk) twice
from the remote commander.
4. Select "Dial" using the , , ,
remote commander and press the PUSH ENTER
button, or press the CONNECT/DISCONNECT button
on the remote commander.
A self-loopback is started and "Dialing" appears on the
monitor screen. "Meeting starts!" appears when the
loopback is completed. Confirm that video picture and
voice are looped back at this time.
PCS-G70/G70P
Section 2

Maintenance

Phone Book
Detail Dial
History
Menu
012.345.678.678
Information
012345678956789
Dial
Dial
buttons on the
buttons on the
2-2. LAN Communication Test Using
Ping
A LAN communication test can be performed using ping
(ICMP).
Operation procedure
1. The launcher menu below is displayed when the power
switch on the communication terminal is turned on.
Tokyo
New York
IP:
ISDN:
Paris
AUTO
Enter the remote party number.
Line type Number text box
2. Select "Line I/F" using the , , ,
remote commander, and press the PUSH ENTER
button. Then, select "LAN" using the
and press the Enter button.
3. Select the number entry field using the , , ,
buttons on the remote commander, and press the
PUSH ENTER button. Then, enter "PING. remote IP
address" from the remote commander.
For example, enter PING.192.168.0.1 when perform-
ing a connection test to a terminal whose IP address is
192.168.0.1.
Alphabets and numeric characters are switched using
the "ALPHA/NUM" button on the remote commander.
4. Select "Dial" using the , , ,
remote commander and press the PUSH ENTER
button, or press the CONNECT/DISCONNECT button
on the remote commander.
5. The screen during LAN dialing is displayed. A
message "I reply from 192.168.0.1" is displayed in
yellow below the "Dialing (LAN)" dialog box when
the communication using ping succeeds.
The number at the beginning is counted up sequential-
ly. When it reaches 4, a message window "Line cannot
be connected completely. No reason: Redial" appears
at the bottom of the screen.
When the communication using ping cannot be
performed, no yellow characters is displayed and the
message window above appears.
Phone Book
Detail Dial
History
Menu
012.345.678.678
Information
012345678956789
Dial
Dial
buttons on the
and buttons,
buttons on the
2-1