Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Parallel Adjustment
In the following cases, perform parallel adjustment for
the Media Feeding Unit and Auto Take-up Reel Unit.
❏ There are problems with media feeding
❏ There are problems with take-up
❏ The printer has been moved
Parallel adjustment requires two persons because the
front and rear side of the printer must be checked and
adjusted simultaneously.
Perform parallel adjustment using the included roll core
and adjustment tools. Two types of adjustment tools
may be included. When both A and B are included, use
A.
A
B
For parallel adjustment using A, read the next section.
For parallel adjustment using B, read the following.
"Parallel Adjustment Using Tool B" on page 149
U
Parallel Adjustment Using Tool A
Parts used in the following adjustment
Appendix
The SC-F7200 and SC-F7100 Series includes two types
of hexagon wrenches. For parallel adjustment of the
Media Feeding Unit, use the large hexagon wrench.
a
Note:
When the film will be reused, the adhesive side may be
soiled. Soak a lint-free cloth in water, wring it out, and
then use it to wipe away the dust and lint stuck to the
reverse side.
Media Feeding Unit
A
Confirm that the printer is off.
B
Open the front cover and raise the media loading
lever.
138
b
Advertisement
Table of Contents
