Configuring The Mpls-Tp Tunnel - Cisco ASR 900 Series Manual

MPLS Transport Profile

Configuring the MPLS-TP Tunnel

On the endpoint devices, create an MPLS TP tunnel and configure its parameters. See the interface tunnel-tp
command for information on the parameters.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface tunnel-tp number
4. description tunnel-description
5. tp tunnel-name name
6. tp source node-id [global-id num]
7. tp destination node-id [tunnel-tp num[ global-id num]]
8. bfd bfd-template
9. working-lsp
10. in-label num
11. out-label num out-link num
12. exit
13. protect-lsp
14. in-label num
15. out-label num out-link num
16. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
Configuring the MPLS-TP Tunnel
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
27