Loading Tab Paper
Follow the procedure below to load the tab paper into the paper
decks.
IMPORTANT
You cannot use A4 tab paper whose tab width are 13.5 mm or less from the
both edge.
13.5 mm
Changing the Paper Size for the Tab Feeding
Attachment-C1
You can load only A4 or LTR tab paper to the Tab Feeding
Attachment-C1. Follow the procedure below to change the paper size.
This example describes how to change the paper size from LTR
to A4.
1
Place the tab feeding attachment on the stable stand.
2
Hold the tab feeding attachment in its upright position, as
shown below.
Tab Feeding Attachment-C1
A3-38