AGFA Drystar 5302 Reference Manual page 103

General save configuration procedure
Each time the settings have been changed and confirmed, an automatic back-
up of the old configuration is made on the hard disk. You will also be asked to
create a back-up on an external CF-card.
It is also possible (and recommended) to regularly make a back-up of the printer
settings to ensure safe restoring of the values when required.
Perform steps 1 to 2 of the
1
page 103 to select the 'Save configuration' screen.
On the Save configuration menu, press the Confirm key to select 'General'.
2
The following screen appears:
The printer settings are saved automatically to the hard disk. When 100% is reached,
the following 'Save configuration' screen is displayed and the printer will ask you to
insert a CF-card:
Insert a CF-card.
3
Refer to
The printer saves the configuration on the external CF-card:
C <path><filename>
A <path><filename>
When the writing of the save set is finished, the printer will ask you to remove the CF-
card:
2830A EN 20050526
'Accessing the save configuration menu'
'Inserting a CF-card' on page 25.
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (Key-operator mode)
103