Restoring The Network Settings - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Restoring the network settings

When necessary, you can restore the network settings of the printer. You can
only restore a back-up copy of the network settings from an external CF-card.
Perform steps 1 to 2 of the
1
on page 107.
On the Restore configuration menu, press the Down key, followed by the
2
Confirm key to select 'Network only'.
The following 'Restore network' screen appears:
Insert the CF-card, which contains a back-up of the network settings.
3
Refer to
Make sure that you insert the correct CF-card, containing the network settings you
want to restore.
If no data are available on the CF-card, the following message is displayed:
If multiple data are present on the CF-card, the following screens appear
successively:
Afterwards, the 'Restore network' screen is displayed:
1 From 05/04/05
2 From 28/03/05
etc...
Press the up/down arrow keys to select the desired save set file, followed by the
4
Confirm key.
The following confirmation screen is displayed:
From 05/04/05 16:30
112
Advanced operation (Key-operator mode)
'Accessing the re store configuration menu'
'Inserting a CF-card' on page 25.
procedure
2830A EN 20050526