Changing General Image Quality Settings - Film Calibration - AGFA Drystar 5302 Reference Manual

Changing the image quality settings

Changing general image quality settings - Film calibration

Perform steps 1 and 2 of the
1
page 68.
On the Change settings menu, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 etc...
Press the Confirm key to select 'General settings'.
3
The 'General settings' screen is displayed:
Press the Confirm key to select 'Def. film calib.'.
4
OFF
This setting is by default set to ON and will apply to every modality. The currently
active setting is indicated with a '*'.
For more information on film calibration settings: refer to
calibration policy'
2830A EN 20050526
'Accessing the Change settings menu'
on page 195.
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
'Understanding the
Advanced operation (Key-operator mode)
89