AGFA Drystar 5302 Reference Manual page 87

Press the Confirm key to store the data, or the Escape key to quit the procedure
7
without any changes.
The 'Select modality brand name' screen is displayed:
2 FUJI
3 SIEMENS
4 PHILIPS
Press the up/down arrow keys to select the appropriate modality brand name.
8
If you have selected 'Default profile', the modality AE-title will be linked with
the default settings. Proceed with step 11.
Press the Confirm key to store the data, or the Escape key to quit the procedure
9
without any changes.
The 'Select modality type' screen is displayed:
2 MXVIEW
3 MX800
Press the up/down arrow keys to select the appropriate modality type.
10
Press the Confirm key to store the data, or the Escape key to quit the procedure
11
without any changes.
The 'Enter modality AE-title' screen is displayed.
Enter the modality AE-title by means of the arrow keys.
12
Refer to 'Data entry'
If you press the confirm key without entering a modality AE-title, the following
message appears:
If you enter an existing modality AE-title, the following message appears:
2830A EN 20050526
on page 31. The modality AE-title is limited to 16 characters.
D 5302 R
RYSTAR EFERENCE MANUAL
Advanced operation (Key-operator mode)
87