AGFA Drystar 5302 Reference Manual page 143

Press the up/down arrow keys to increment/decrement the numbers. Press the
3
left/right arrow keys to move through the fields. Press the Confirm key to store
the data.
Refer to
Note that blank spaces will be ignored (see examples below).
Example 1: if the IP address is 120.000.120.120, then the data entry should be as
follows:
12 00 12
Example 2: if the IP address is 120.0.120.120, then the data entry should be as
follows:
12 12
Press the Confirm key to store the data, or the Escape key to quit the procedure
4
without any changes.
The 'Netmask' screen is displayed:
250.250.250.250
If the netmask has already been assigned, it will be shown on the display.
When no DHCP server is available and when the subnet mask of the printer has
never been set, the printer subnet mask will be set to the APIPA address
255.255.0.0.
Enter the netmask by means of the arrow keys. Refer to
5
Note that blank spaces will be ignored (see example).
Example: if the netmask is 250.250.250.0, then the data entry should be as follows:
250.250.250.
2830A EN 20050526
'Data entry' on page 31.
12
12
0
D 5302 R
RYSTAR EFERENCE MANUAL
'Data entry' on page 31.
Advanced operation (Key-operator mode)
143