AGFA Drystar 5302 Reference Manual page 68

D 5302 R
RYSTAR EFERENCE MANUAL
Accessing the Change settings menu
Before you can change the settings, the 'Printer installation wizard' should be
executed. If the printer has not yet been installed, the following screen is displayed:
Proceed as follows to access the 'Change settings' menu:
Press the Key-operator key to enter the key-operator mode.
1
On the key-operator main menu, press the Down key, followed by the Confirm
2
key to select 'Change settings'.
The 'Change settings' menu is displayed:
5 Image quality
This menu is the starting point for changing the Drystar 5302 settings.
Press the Escape key to return to the key-operator main menu.
3
Press the Escape key to quit the key-operator mode.
4
When the printer settings have been changed, the 'Accept changes' window is
displayed:
Do one of the following:
5
•
Press the Confirm key (YES) if you wish to accept the changed settings. Proceed
with step 6.
•
Press the Escape key (NO) if you want to quit the procedure without any changes.
Each time the settings have been changed and confirmed, an automatic back-up
6
of the old configuration is made on the hard disk.
68
Advanced operation (Key-operator mode) 2830A EN 20050526