Changing The Printer Ip Address - AGFA Drystar 5302 Reference Manual

Changing the printer IP address

Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Down key three times, followed by the
2
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
On the 'Network (DICOM)' screen, press the Down key three times, followed by
3
the Confirm key to select 'Printer IP-Address'.
The 'Printer IP address' screen is displayed:
12 12 12
If the IP address has already been assigned, it will be shown on the display.
When no DHCP server is available and when the IP address of the printer has never
been set, the printer IP address will be set to the APIPA address 169.254.10.10.
Press the up/down arrow keys to increment/decrement the numbers. Press the
4
left/right arrow keys to move through the fields. Press the Confirm key to store
the data.
Refer to
Note that blank spaces will be ignored (see examples on next page).
2830A EN 20050526
'Accessing the Change settings menu'
12
'Data entry' on page 31.
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (Key-operator mode)
81