Changing The Film Format - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Changing the film format

Using the following procedure you can overrule the film format, which is
automatically read by means of the Film Identification tag on the film pack.
This procedure is only to be used exceptionally when the Film
Identification tag info is incorrect.
Perform steps 1 and 2 of the
1
page 68.
On the Change settings menu, press the Down key once to change the upper
2
tray settings, twice to change the lower tray settings, followed by the Confirm
key'.
The 'Input tray' screen is displayed:
Press the Down key twice, followed by the Confirm key to select 'Film format'.
3
The 'Film format' screen is displayed:
1* 8x10
2 10x12
3 11x14
4 14x14
5 14x17
OVERRULE to RF-tag
The film format read by the Film Identification tag is marked with a '*'.
The message 'OVERRULE to RF-tag' is only visible if the film format, specified by the
Film Identification tag, has been overruled.
Press the up/down arrow keys to select the film format.
4
76
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
Blinking
procedure on
2830A EN 20050526