Viewing General Image Quality Information - AGFA Drystar 5302 Reference Manual

Viewing general image quality information

Perform steps 1 and 2 of the
1
page 57.
On the Show settings menu, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
Press the Confirm key to select 'General settings'.
3
The following screen appears:
Do one of the following:
4
•
If you select 'Def.film calib.' the general image quality settings are displayed.
Proceed with step 5.
•
If you select 'Def. densitometer', the default densitometer type is displayed.
Proceed with step 6.
The general image quality settings are displayed:
5
- Dmax result: 3.19
Lower input tray
- Dmax result: 3.2
The following information is displayed:
•
wether the automatic film calibration setting is set to OFF or ON,
•
the number of film packs determining the automatic film calibration interval (e.g.
every '05' film packs) (only if film calibration setting is set to ON),
•
the maximum density result value (e.g. '3.10') of the last successful film calibration
for the upper and lower input tray.
Proceed with step 7.
2830A EN 20050526
'Accessing the Show settings menu'
Status: ON or OFF
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (Key-operator mode)
61