Adding A Modality - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Adding a modality

Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Down key three times, followed by the
2
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
On the 'Network (DICOM)' screen, press the Down key seven times, followed by
3
the Confirm key to select 'Add modality'.
The 'Collect info' screen is displayed, asking you to gather the appropriate
4
information on the new modality (see your System Administrator if necessary):
-Modality type
-Modality AE title
Press the Confirm key to continue, or the Escape key to quit the procedure
5
without any changes.
If you press the Confirm key, the 'Enter daily used Modality name' screen is displayed:
Enter the daily used modality name (nickname) by means of the arrow keys.
6
Refer to 'Data entry'
86
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
on page 31. The nickname is limited to 8 characters.
procedure on
2830A EN 20050526