Transport After Installation - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Transport after installation

The Drystar 5302 is quite compact, so moving the printer over a short
distance - if required - can be done in a convenient way.
Refer to
Always keep in mind the following safety guidelines:
•
The Drystar 5302 should always be transported by two, preferably three
persons,
•
Always lift the Drystar 5302 by gripping the handles, situated at front, left
and right side,
•
Make sure the Drystar 5302 is placed on a stable, hard surface table.
Switch off the Drystar 5302 (refer to
1
page 34).
Disconnect the cables.
2
Move the Drystar 5302 to its destination (with 2, preferably 3 persons!).
3
Reconnect the cables.
4
Switch Drystar 5302 on (refer to
5
170
System description
'Safety precautions' on page 11.
'Switching on the Drystar 5302'
'Switching off the Drystar 5302' on
on page 32).
2830A EN 20050526