Quality Control - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Quality Control

In order to establish and maintain consistent image quality, a regular
evaluation of image quality is advised.
The Drystar 5302 contains an automatic QC feature that has been designed to
comply with the grayscale reproduction constancy test, according to the
international standard IEC 1223-2-4.
Local Regulations may require other procedures.
The Drystar 5302 QC procedure consists of two main steps:
•
Before initial use, establishing a number of reference values that will be
used for further follow-up and verifying initial image quality.
Refer to
•
After establishing these values, performing regular daily, weekly and
annual quality tests.
Refer to
The results of these tests are recorded on Quality Control Charts.
The QC image (Refer to
fields where the QC data can be filled in. This image should be filed as part of
the QC procedure.
For more information, please refer to
124
Advanced operation (Key-operator mode)
'Establishing the reference values and verifying image quality'
'Performing quality control (QC) tests'
'QC test image'
on page 133.
on page 126) has several additional
'Quality Control Charts'
on page 125.
on page 211.
2830A EN 20050526