AGFA Drystar 5302 Reference Manual page 105

Network only save configuration procedure
Perform steps 1 to 2 of the
1
page 103 to select the 'Save configuration' screen.
On the Save configuration menu, press the Down key, followed by the Confirm
2
key to select 'Network only'.
The following screen appears:
A blank network name or a network name with spacings is not allowed.
Press the Confirm key to confirm the network name.
3
The network settings are temporary saved on the hard disk.
When 100% is reached, the following 'Save network' screen is displayed and the
printer will ask you to insert a CF-card:
Insert a CF-card.
4
Refer to
The printer saves the network settings on the external CF-card:
C <path><filename>
A <path><filename>
When the writing of the save set is finished, the printer will ask you to remove the CF-
card:
2830A EN 20050526
'Accessing the save configuration menu'
e.g. hospital_site1
'Inserting a CF-card' on page 25.
D 5302 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (Key-operator mode)
105