AGFA Drystar 5302 Reference Manual page 69

When the automatic backup is finished, you will also be asked to create a back-
7
up of the new settings on an external CF-card.
Do one of the following:
8
•
If you want to save the configuration on the back-up CF-card, press the Confirm
key (YES). The printer will now enter the
(see page 103).
•
If you only want to save the configuration on the hard disk, press the Escape key
(NO) and proceed with step 9.
Depending on the settings that has been changed, you go directly to the key-
9
operator main menu are via the following intermediate screen:
Press the Confirm key to reset the printer or press the Escape key to reset later. After
the reset, the new settings will be active.
2830A EN 20050526
D
RYSTAR
'General save configuration procedure'
Advanced operation (Key-operator mode)
5302 R
EFERENCE MANUAL
69